Putty powder production line
The putty powder production line is mainly composed of the following equipment:
1. Raw material storage equipment
The putty powder production line is used to store bulk raw materials. Generally, the tank design is used and the tank truck is used for feeding. During the construction of the project, only two small raw material storage tanks need to be added to store small quantities of raw materials, such as rubber powder, additives, etc.
2. Batching device
It is composed of hopper metering scale, feeding dragon, discharging device, micro material adding device and computer control system. It can automatically measure different raw materials according to the formula, reduce labor intensity and environmental pollution, and ensure the product quality of putty powder.
3. Mixer
There are a variety of mixer options, such as double screw cone mixer, plow mixer, screw belt mixer, double shaft paddle weightless mixer, etc.
The requirements for putty powder mixer are: uniform mixing, no dead corner, high efficiency, wear-resistant equipment and fast unloading speed. The above mixers are mostly used in putty powder production line, such as double shaft paddle weightless mixer and plow mixer.
Recommendation: weightless mixer – suitable for dry powder mixing, or “Throwing Knife” can be added as required.
Plow mixer – suitable for mixing and liquid mixing of fibrous materials.
4. Packaging machine
There are open pockets and valve pockets. The valve pocket packing machine is widely used for putty powder, because the valve pocket packing needs no seam and can be operated by one person, but this packing machine is not suitable for packing light materials. The cost of the bag is slightly higher, but the packing speed is fast. The open pocket packing scale can pack all kinds of materials, but it needs to be sewn after bagging. Relatively speaking, the cost of the bag is slightly lower (the bag can be recycled), but the packaging speed is slightly slower. Compared with the valve pocket packing machine, the operator of this packing machine needs to be increased by one person.
5. Dust collector
It is used to recover dust in dry powder mortar production line, which is conducive to environmental protection. It is generally set at the top of the cement silo, the material conveying port of the hoist, etc.
Recommended equipment: pulse dust collector
6. Conveying and lifting structure
The material conveying methods used in the silo of the production line include horizontal conveying and vertical conveying. Screw conveyor can be used for horizontal conveying, and bucket elevator is generally used for vertical conveying.
Range
This putty powder production line can produce interior wall putty and exterior wall putty by mixing different proportions of raw materials; Interior wall series: ordinary putty, mirror putty, nano bactericidal putty, humidity control and air filtration putty, anion putty.