Professional Team

30 years experience in mixing technology

Industry News

  • Dry mixed mortar production line leakage material issue

    Dry mixed mortar production line leakage material issue

    Dry mixed mortar production line pursues more environmental protection on the basis of production process. In the actual production process of dry mixing mortar equipment, some parts need special attention in material leakage treatment. Material inlet and outlet of bucket elevator. Materials to ...
    Read more
  • Overhaul and maintenance of large concrete mixing plant

    Overhaul and maintenance of large concrete mixing plant

    The first warranty repair cycle of concrete mixer is determined according to the volume of concrete mixed or the application time. Generally, 5000 cubic meters of concrete mixed by concrete mixer should be repaired and cured, or the application time is at the mercy of two months. After the first...
    Read more
  • Maintenance of concrete pump

    Maintenance of concrete pump

    The equipment maintenance and repair of concrete pump manufacturers are widely used in some special construction environments. The construction of railway, highway tunnel, headrace tunnel, mine tunnel, bridge tunnel and other tunnels, including water conservancy engineering, hydropower engineeri...
    Read more
  • Safe use of concrete pump

    Safe use of concrete pump

        The operation of the concrete pump is simple. It only needs to connect the pump pipe. After all preparations are completed, the operator only needs to carry out simple remote control operation to make the concrete pump mix and pump concrete again and again. At the same time. It is also a m...
    Read more
  • How to maintain the pumping part of the concrete pump

    How to maintain the pumping part of the concrete pump

    1. When the concrete pump is working, check the oil quality and oil level of the hydraulic oil every 8 hours, and supplement and replace it if necessary. The newly added hydraulic oil must be consistent with the oil brand in the oil tank. The hydraulic oil filled in the concrete delivery pump wh...
    Read more
  • Precautions in use and maintenance of fine aggregate concrete pump

    Precautions in use and maintenance of fine aggregate concrete pump

    Precautions in use and maintenance of fine aggregate concrete pump. 1. Outrigger operation. The ground supported by the legs of the fine aggregate concrete pump needs to be flat and solid to ensure that it will not sink during the working process, and that the legs can stably and reliably suppor...
    Read more
  • Edit Dry powder mortar equipmentneed add additives

    Edit Dry powder mortar equipmentneed add additives

    When using dry powder mortar equipment, some additives are often added, because it can better realize uniform mixing of materials. What additives are generally used when using? The first is barite (BaSO4). The technical requirement of this additive is that the purity should be more than 95% and ...
    Read more
  • Instructions of using concrete mixer

    Instructions of using concrete mixer

    1. Before the operation of the concrete mixer: before the operation of the concrete mixer, it needs to be checked and tightened to ensure normal operation. The protective cover shall be installed on the large gear ring, belt pulley and other parts. Foreign matters shall not be stuck in the mixin...
    Read more
  • The simple dry powder mortar production line

    The simple dry powder mortar production line

    The simple dry powder mortar production line is designed in combination with the manufacturer’s investment scale and plant. The process is reasonable and low-cost, with electric feeding machine, automatic filling machine, storage tank, electric control cabinet and other equipment. External...
    Read more
  • Performance and causes of insufficient concrete strength

    Performance and causes of insufficient concrete strength

      Performance and causes of insufficient concrete strength Performance of insufficient strength: insufficient concrete strength will be accompanied by reduced impermeability and durability, and more importantly, it will affect the bearing capacity of the structure. It is mainly manifested i...
    Read more
  • Differences between prefabricated buildings and traditional cast in situ concrete concrete structures

    Differences between prefabricated buildings and traditional cast in situ concrete concrete structures

      1. Functional diversification Through a large number of on-site assembly operations, the on-site cast-in-situ operation is greatly reduced and the labor productivity can be significantly improved. From the functional point of view, first of all, the exterior wall design of prefabricated b...
    Read more
  • The maintenance of concrete batching plant

    The maintenance of concrete batching plant

      The unique temperature and humidity in summer will have a certain impact on the work of concrete mixing plant, and the maintenance and repair of mixing plant equipment in summer is also different from other seasons. After the concrete mixing plant is completed, how to maintain it? 1. Insp...
    Read more
12 Next > >> Page 1 / 2
+86 15192791573