Electrical trialer concrete pump

● PLC programmable computer control
● Adopting dual cylinder full hydraulic pumping
● Horizontal 400 meters to 500 meters, vertical 150 meters to 180 meters
● Convenient to move
● Large volume hydraulic oil tank
●Electrical motor

 

GET INSTANT QUOTE

    FEATURES

    Product Details

    Description

    HBT series electrical concrete conveying pump
    Concrete Delivery Pump

    Concrete pumps are divided into towed concrete pumps, vehicle mounted pumps, and pump trucks based on their structure and purpose. They are also divided into electric concrete delivery pumps and diesel powered concrete delivery pumps based on their power types. Concrete pumps are divided into piston type, compression type, and water pressure diaphragm type according to their structural forms. The pump body is installed on the chassis of the car, and then equipped with retractable or folding fabric rods to form a pump truck. Among them, the trailer concrete pump is mainly used for pouring concrete into high-rise buildings in construction and construction sites, also known as concrete conveying pump, trailer pump, ground pump, etc., composed of pump body and pump pipe. This device is one of our company’s traditional products.

    To meet the needs of outdoor construction sites and other non powered work environments, The pump integrates mechanical, electrical, and hydraulic technologies, and the power system uses diesel engines that meet emission standards. It has the advantages of reliable performance, smooth operation, and convenient maintenance. It can operate stably in harsh environments, solving the problem of power free operation.

    In addition, the HBT diesel powered concrete pump of macpex adopts the “automatic adjustment of diesel engine speed” technology. During the pumping process, the speed of the diesel engine is detected by the speed sensor and transmitted to the control computer. The change in pumping pressure will cause corresponding changes in the diesel engine speed. The control computer controls the throttle motor to increase or decrease the throttle based on the detected speed change, automatically adjusting the diesel engine to operate at an appropriate speed state, The goal of achieving smooth and reliable pumping operations and saving fuel has been achieved.

    Performance characteristics
    1. Electrical system: The entire machine is PLC programmable and controlled by a computer. The control circuit adopts optimized design, and the operation is simple. Equipped with a wireless remote control for easy remote operation.
    2. Pumping system: Adopting dual cylinder full hydraulic pumping improves work efficiency and reduces failure rate.
    3. S-pipe distribution valve (utility model patent number ZL 2015 2 0154080.6): equipped with a floating wear-resistant ring, automatically compensating for wear, good sealing, simple and reliable structure, improving work efficiency, and reducing maintenance costs. It has two working modes: low-pressure large displacement and high-pressure small displacement.
    4. Reversing system: Adopting electric and hydraulic control for reversing, with sensitive response and good stability.
    5. High outlet pressure: Horizontal conveying can reach 400-500 meters, and vertical conveying can reach 150-180 meters, which can meet the conveying requirements of high-rise buildings and long-distance construction.
    6. Cooling system: Hydraulic oil cooling adopts an oil air cooler cooling system with high cooling power, ensuring that the working oil temperature of the hydraulic system is controlled below 60 ℃, eliminating the limitation of water source for water-cooled radiators, making construction convenient and equipment easy to move.
    7. Hydraulic oil circuit: Adopting an open hydraulic system, the reversing speed is improved and the efficiency is higher.
    8. Anti pump function: With anti pump function, it adopts automatic pressure protection to reduce pipeline blockage, improve work efficiency, and extend the service life of pipelines.
    9. Hydraulic oil tank: using large capacity liquid accumulation

    Specification

    Electrical Concrete pump ME15-13-30 ME30-08-37 ME50-13-55 ME60-16-90 ME80-16-110
    Theo conveying capacity (m3/h) high pressure 7 13 22 37 47.5
    low pressure 15 26 46 63 78
    Theo conveying pressure (MPa) high pressure 13 9.5 13 16 16
    low pressure 6 4.5 6.2 9.2 9.2
    Conveying height (m) level 550 400 550 650 650
    vertical 180 130 180 220 220
    Rated power of the main power system (Kw) 30 37 55 90 110
    Distribution valve form S valve S valve S valve S valve S valve
    Distribution valve form 20/25 25/30 25/30/40 40/50 40/50
    Concrete slump (mm) 100-230 100-230 100-230 100-230 100-230
    Power type Motor Motor Motor Motor Motor
    Loading volume (m3) 0.34 0.4 0.5 0.6 0.6
    Loading height (mm) 1050 1180 1350 1400 1400
    Weight 1480 2200 3200 5200 5600
    Dimensions(mm) 3380×1270×1450 3770×1420×1620 4300×1670×1680 6200×1882×1965 6200×1882×1965

    Customer FAQs

    Please get free consultant for your questions.

    We can customize the equipment like make bigger batch machine or silo,make higher discharge gate of silo.

    Yes, for example in China is 380v, 50Hz, in KSA is 380v, 60Hz, we have to adjust the motor accordingly.

    We normally use standard container to load the goods, sometimes use flat rack or Ro-Ro for truck pump these big size goods.

    Normally 30 to 40 days. If in  the peak of production the delivery of goods will more longer time.

    For our company payment term mainly is TT 30% deposit the balance money by copy of BL at sight and LC st sight. if you become our old client we also can do DP or OA 30 days.

    Yes, you can assign SGS/BV or others to inspect goods before shipment.

    Get Custom Quote

    Have a question? Get in touch instantly using the form below.
    Our customer support team would get back to you soon.

      Get Custom Quote