Stationary placing boom

Description

Horizontal reach: 28-34m (not including the end hose) ，Mode of drive: fully hydraulic;

the climbing type concrete placing boom can be anchored to the floor with initially prepared holes when working, and it can be

lifted itself by its equipped climbing system, one lifting can meet the need of two floors concrete placement

If the floor area is large. several tower bodies can be insta ed and move the boom assembly onto relevant tower body to meet the

needs of certain area concrete placement and save cost.

Compact structure, easy operation, reliable safety, economical and practical, it can be installed on either floor or lift shaft.

Stationary type Model		HG28	HG32	HG34
Delivery pipe dimension(Outside diameter×thickness) ㎜		Φ134×4	Φ134×4	Φ134×4
Delivery hose dimension (inside diameter×length) ″×㎜		5″×3000	5″×3000	5″×3000
Radius of placing boom（ m）		28	32	34
Stationary height(to the join between the end of the boom and swivel table(m)		22.9	22.9	22.9
Boom length m	1st section	8.1	9.1	9.5
	2nd section	6.7	7.7	8.2
	3rd section	6.5	7.11	8
	4th section	6.4	7.4	7.9
Slew angle °	1st section	－4.2°～＋82.5°	－4.2°～＋82.5°	－4.2°～＋82.5°
	2nd section	0°～180°	0°～180°	0°～180°
	3rd section	0°～180°	0°～180°	0°～180°
	4th section	0°～180°	0°～180°	0°～180°
Slewing range °		360	360	360
Motor kW		11	11	15
Hydraulic system pressure MPa		28	28	28
Hydraulic oil code		ESSO NUTO H46	ESSO NUTO H46	ESSO NUTO H46
Climbing method by		Floor/elevator shaft	Floor/elevator shaft	Floor/elevator shaft
Balance weight		/	have	have
Operation type		cable/remote control	cable/remote control	cable/remote control
Control type	Standard	step speed regulation	step speed regulation	Stepless speed regulation
Control type	Optional	Stepless speed regulation	Stepless speed regulation	Stepless speed regulation
Voltage/Hz		380/50	380/50	380/50
Wind speed m/s	Working	≤13.8	≤13.8	≤13.8
Wind speed m/s	Climbing	≤7.9	≤7.9	≤7.9
Working temperature	℃	0～60	0～60	0～60